Here is how we did it. Dismantled a pallet, held a pallet slat up to the wife to get an idea of how wide and tall it should be, cut the slats to length, and nailed them to 2×2 piece of wood for structural support, ripped 2 slats to cover the 2×2 pieces in the front and back, then drilled 2 holes on each side and tied off some rope for handles on each side.
This project was even done without the use of a measuring tape. Yep, it’s that easy. However, if you have any questions don’t hesitate to ask and we will get back to you ASAP.